Outdoor Plantation Shutters Manufacturer. Buy Direct


Auriga 300

Shutters R Us Auriga  90 Continuous Louvre  profile 

It has many applications 

Classic 90 AL


Features and Benefits


Plantation Shutters Aluma Series
No Stick or Tilt Rod Featuring LouverMate ®Mechanism - No staples to work their way loose, no tension rod or screws to work loose, no unsightly stick to detract from the view. Our patented system ensures tight closure of blades. Less moving parts means less to fail.
Solid Double Skin Core All blades and frame profiles are constructed from Architectural Grade heat tempered Aluminium. All sections of frame and blades across our entire range are double or triple wall construction resulting in highly engineered designs capable of wide spans, low deflection and high load capacities. Our blade profiles have been designed to accommodate our exclusive patented ShutterGard internal anti tamper system. A painted Aluminium Shutter is far superior to a wood shutter in construction, durability, paint hardness and expectation of life cycle.
High Build High Durum Powder Coat The integrity of paint build and adhesion should not be under estimated. Its not worth debating the comparisons of lacquers on wood or wet paints on other surfaces when Powder Coat is considered such a reliable high standard coating. We provide a 7 year standard warranty on Adhesion and Gloss factor on all of our Aluma range
Tough Impact resistant material High traffic shutters are well suited to Commercial, Hospitality and public access installations. Our Aluma Series Shutters are available in Live Load, Human Impact and Cyclone rated versions. Our Aluminium Shutter designs look exactly the same as Cedar profiles.
Fire Resistant Choose Aluminium and Fire Rated ABS internal operating mechanisms to meet Fire Zone compliances.
Precision Engineered We use only stainless Steel or High Strength polymer components to construct our shutters. No rust, no failure.
Easy to Clean & Maintain Simply wash down with soapy water as you would to clean your car.
Blade Profile Classic 90
Frame Suite Oceana "O" or Pacifico "P" Frame
Frame Dimensions Rails O- 70 x 23mm 107 x 23mm P- 80 x28mm Stiles O- 60 x 28mm 90 x 28mm P- 53 x 36mm
Blade Dimensions 90 x 12
Blade Projection 31 mm
Blade Operation 350°
Fixed Blades Yes, any angle
Blade Grouping / Banks Max 10 blades per bank
Pitch of Blades / Centres 81 mm
Opening Vista 69 mm
Total Mass Kg/m² 10kg/m²
Max. Panel Width 1000 mm
Max. Panel Height 2400mm (Midrail required after 1800mm)
Colours & Finishes White Satin, Anotec Off White, Custom, Natural Anodized
Mullions Yes if panel over max width. Back to Back stile.
ShutterGard (Security Option) Yes (Patented)
Cyclone Rated Yes (Patented)
Acoustics 60
Insulation Yes EPS
Motorization Yes, hard wired or battery
Hinged Yes
Sliding Yes, Bottom or Top run systems
Bi-folding Yes
Drop Fixed Yes 50/25 Channel
Wall Trim Yes
Bracket Fixed Yes
Sun hood T Welded Brackets Yes
Sun hood Post Brackets Yes
Roofing System Yes
Triangular Shapes Yes
Flat Packs Yes
Combo Shutter Option Yes
Lock Options Yes
Dominator Yes


Trade Mark Classic Ellipti Design
Material Aluminium
Blade Profile Elliptical Contour Shape
Design Horizontally Placed Elliptical Blades 
operating Cogently via patented ‘Louvre Mover’ 
fully integrated operating system
Blade Operating Range 350º
Projection 31 mm
Blade size 90mm wide
Total Mass Kg/ m² 13Kg
Suitability Security / High Impact / Exterior / Interior/ Balustrade AS 1170 Compliant
Blade Grouping Customizable – 
Equal if not specified
Open vista 65mm Clear Opening
Pitch of Blade(Centres) 80mm
Section Rail 70 mm or 107mm x 25mm
Stile 50mm x 28mm
Max. panel width (Hinged/Slider) 1000mm, may be extended for fixed panels
Max. Panel height Recommended 2400mm Custom designed to 6.500 metres(Mid Rail required, wind fin designed to suit)
Max. Vertical Mullion Centres Blade Length dependant
Max. operable blade configuration 900mm
Mid rail Not required if less than 1800mm subject to width criteria
Stiles 50mm Wide
Frame thickness 28mm
Top rails 70 x 25mm or 107 x 25mm
Bottom rails 70 x 25mm or 107 x 25mm
Finishes Anondized or Select from Powdercoat range
Blade Configurations Horizontal / Vertical
Panel Configurations Inside: Reveal Mount Hinged 
Outside: Face Mount Hinged 
Removable Drop Fixed
Cupboard catch
Options Pre-hinged and framed Architrave or 
Z Mould (ready to install)

Motorized for internal or external use 
Supply only panel only (self install)
Supply and installation quoted

May be configured as a balustrade compliant system conditional upon site and fixing details conforming to our Engineer's recommendations.

Hardware Key Locks, Star Pin Drop Bolts, Hinges, Flush bolts, draft excluder, touch-up paint